Show pageOld revisionsBacklinksBack to top This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong. ====== Clock sources information ====== There are two Crystal oscillators mounted on the board, one provides a frequency of 12MHz which is only used for the camera, and the other a frequency of 50MHz. The FPGA-pin connection is shown in the table below. {{:mse-em-board:clocks.tcl| Here}} you find an example tcl script that can be used for pin-assignment in Quartus with {{:mse-em-board:clocks_sdc.tcl| here}} the corresponding sdc file. <html> <table align="center" style="float:center" border=1> <tr> <th>Clock</th><th>FPGA-pin</th> </tr> <tr> <th>50MHz</th><td>PIN_T1</td> </tr> </table> </html> /opt/bitnami/dokuwiki/data/pages/mse-em-board/clocks.txt Last modified: 2020/09/29 15:43by adm-hga3