====== DIP-switches and buttons information ======
The MSE-Embedded platform contains one 8-position DIP-switche and twelve buttons as shown in the below figure.
{{ mse-em-board:mse-em-board_wav_dipswitch.jpg?direct&400 |}}
Each of these switches and buttons is connected to an individual FPGA-pin. In case a switch is activated it gives 0V (logic 1) and if it is not activated it gives VCC (logic 0) on the FPGA-pin (the switches are therefore active low). Furthermore, all switches do not include a debouncing circuit and are connected to clock-inputs of the FPGA.
===== DIP-switch(es) information =====
The below table indicates at which FPGA-pin each of the switches of the DIP-switches is connected. And {{mse-em-board:dip_switches.tcl| here}} you find an example tcl script that can be used for pin-assignment in Quartus.
| Switch | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| DIP-switch |
PIN_B11 | PIN_A11 | PIN_B12 | PIN_A12 |
PIN_AA12 | PIN_AB12 | PIN_AA11 | PIN_AB11 |
===== Button(s) information =====
The below table indicates at which FPGA-pin each of the buttons is connected. And {{mse-em-board:buttons.tcl| here}} you find an example tcl script that can be used for pin-assignment in Quartus.
| BUTTON1
| BUTTON2
| BUTTON3
|
| PIN_H11 |
PIN_H10 |
PIN_G11 |
| BUTTON4
| BUTTON5
| BUTTON6
|
| PIN_G10 |
PIN_G9 |
PIN_G8 |
| BUTTON7
| BUTTON8
| BUTTON9
|
| PIN_G7 |
PIN_F7 |
PIN_E10 |
| BUTTON10
| BUTTON11
| BUTTON12
|
| PIN_E9 |
PIN_D7 |
PIN_D6 |